AmCoat Railing Coatings


AmCoat offers Coating Systems for railings to protect from rust, corrosion and wear.  AmCoat’s Railing Coatings offer all these great benefits:

  • Seals Out Water and corrosion
  • Withstands Thousands of Cleanings
  • Beautiful gloss finish, Endless Color Options
  • May be applied by hand or by spraying
  • One-coat solution on galvanized rails
  • Prices start at less than 35 cents per square foot

Get Superior Railing Coatings with AmCoat.  Request a no-cost, no-obligation product and application consultation today.


Call (850)424-6805
or fill out the form on the right.

Product & Application Consultation Request

Click or drag a file to this area to upload.

Railing Coatings for Industrial and Commercial Buildings 

Barclays Center Railings

Railings are important for building safety and appearance.  However because of the design, railings can become an ongoing maintenance problem.  With lots of angles, corners, and edges, rust can seem inevitable on rails.  In addition, railing systems are labor intensive to paint because spraying is wasteful and poses containment problems.  When painting by hand, it is labor intensive because the rails must be painted on all sides.

AmCoat Railing Solutions

Allow AmCoat to provide the best product for your railings.  AmCoat products are successfully protecting rails across the country from the Barkley Center in Brooklyn to wrought iron in the French Quarter.  Our coatings are formulated to protect for many years and thoroughly tested for abrasion and weathering. 

The surface and climate will dictate the best system.  Please contact us for recommendations  The goal is to exit the maintenance cycle with long term beauty and protection.

Benefits of Rhinopoxy on Railings

  • May Be Used in Areas of High Traffic
  • Seals Out Water
  • Withstands Thousands of Cleanings
  • Beautiful Gloss Finish, Endless Color Options
  • Highly Durable
  • Easy to Apply
  • Able to be Driven On 
  • Corrosion Control


Rhinopoxy is a two part, water-borne epoxy. Unlike traditional epoxies, this water based epoxy is eco-friendly, low odor, and easy to apply. Rhinopoxy protective epoxy coatingRhinopoxy provides a high-gloss, hard finish that can protect a wide variety of surfaces.  Rhinopoxy is tintable and benefits include chemical/solvent resistance and excellent hide.


Rhinopoxy is suitable for use on most any horizontal or vertical surface in the toughest conditions.  It can be used in car washes, warehouse floors, driving surfaces, shower stalls, restaurants, hospitals, and everywhere else a tough, highly cleanable, chemical and solvent resistant coating is needed.  Rhinopoxy should only be applied where it will not be exposed to direct sunlight.


• May be Used in Areas of High Traffic
• Seals Out Water
• Withstands Thousands of Cleanings
• Beauiful Gloss Finish, Endless Color Options • Durable
• Easy to Apply
• Able to be Driven On (Hot Tire Pickup)



AmCoat in Action

Place St. Charles – French Quarter in New Orleans, LA

AmCoat was selected to coat the metal facades and railings of one the most prominent commercial office and retail buildings in the French Quarter.  This 200,000 sq ft project was protected with Rust Bond and RhinoUrethane which offered Place St. Charles a total solution for corrosion and rust prevention.

For More Information


Fill out the form & we will get back to you ASAP or call us at (850)424-6805.